Salta al contenuto principale
Passa alla visualizzazione normale.

DIONISIO BADAGLIACCO

An experimental study on the compressive behaviour of calcarenite masonry columns wrapped by fiber reinforced mortar wraps

  • Autori: Minafò; La Mendola; Badagliacco D.; Monaco A.; Cucchiara
  • Anno di pubblicazione: 2018
  • Tipologia: Contributo in atti di convegno pubblicato in volume
  • OA Link: http://hdl.handle.net/10447/297423

Abstract

The use of Fiber Reinforced Cementitious Mortar (FRCM) systems for structural retrofitting of masonry structures has become increasingly popular in the last years, due to the capability of this technique in overcoming some of the drawbacks related to the adoption of resin-based composites. In fact, FRCM systems ensure good compatibility between the reinforcing layers and the substrate, achieving also the removability requirement, which is of fundamental importance for historical constructions. Recent research studies focused on the mechanical performance of FRCM materials, by studying its tensile behaviour and bond between the strengthening layer and masonry, pointing out as failure is always reached due to loss of bond with different mechanisms, the latter depending on the physical properties of FRCM and masonry. Further studies investigated on the effect of FRCM wraps on the compressive behaviour of concrete members and demonstrated as the application of mortar-based composites allows increasing the strength and, above all, the ductility of the column. The main difference with FRP confined columns is related to the different post-peak behaviour, characterized by a softening branch. Differently, few studies are actually available on the literature on the efficiency of FRCM confinement in enhancing the compressive behaviour of masonry columns. This paper presents the results of an experimental investigation on the effect of FRCM wraps on the compressive behaviour of calcarenite masonry columns. A preliminary study on the mechanical performances of the strengthening layer is performed by selecting three different mortar grades for the FRCM and testing these under flexure and compression. Moreover, tensile tests on the glass fibre fabric and on FRCM strips are performed to characterize the behaviour of the reinforcing system. Finally, eleven columns are tested under concentric compression, recording the axial strain, and discussion is made on modes of failure and gains of strength and ultimate strain.