Skip to main content
Passa alla visualizzazione normale.

ONOFRIO SCIALDONE

Electrochemical treatment of wastewater contaminated by organics and containing chlorides: Effect of operative parameters on the abatement of organics and the generation of chlorinated by-products

Abstract

In the last years, large attention has been devoted to the electrochemical treatment of wastewater polluted by recalcitrant organics and containing chlorides. However, the utilization on an applicative scale of this route is limited by the fact that usually it is not possible to achieve high removals of organics without the generation of significant amounts of chlorinated by-products. Here, the role of several operative parameters on the performances of the process was systematically evaluated using phenol as a model organic pollutant. It was shown that the removal of phenol and TOC and the generation of many by-products including chlorophenols, chloroacetic acids, chlorate and perchlorate dramatically depend on the adopted operative conditions (i.e., nature of anode and cathode, current density and concentration of chlorides). The use of boron doped diamond (BDD) anode gave the highest removal of TOC but also the highest final concentrations of chlorate and perchlorate and the lowest concentrations of chloroacetic acids. Conversely, the use of Ti/IrO2-Ta2O5 gave the lowest generation of chlorate and no perchlorate. The use of lower current densities allowed as well to reduce the concentrations of these compounds. It is worth to mention that lower amounts of chlorinated by-products were achieved using suitable cathodes. Carbon felt cathodes, as previously reported for the water disinfection, allowed to reduce the generation of chlorate. Moreover, it was shown, for the first time, that the use of silver cathodes minimized the concentrations of chloroacetic acids. In addition, it was found that the use of a system equipped with both silver and carbon felt cathodes and proper current densities allowed to increase remarkably the removals of TOC and the current efficiency and to achieve very low concentrations of chlorinated by-products.